ZIDI240WII
GE Monogram® Double-Drawer Refrigerator Module
(Custom panel required)
ZIDS240WSS
GE Monogram Double-Drawer Refrigerator Module
(Stainless steel)
Dimensions and Installation Information (in inches)
Installation Space
For a complete food storage center, install two Monogram
refrigeration modules side-by-side.
Locate Outlet
10-1/2"
Note: Reversible door swing on wine chillers/reserves and
beverage centers only. See below for combination cutout
dimensions.
Important Note: Products must operate from separate,
properly grounded receptacles.
24" Min.
23-3/4" Stainless Steel
9"
Max.
34-1/2"-35"
Models
24-7/8" Framed Models
1-1/2"
23-3/4" Min.
Locate Outlets
24"
Depth Including
Handle:
26" Stainless Steel
Models Only
34-1/2"
10-1/2"
10-1/2"
24" Min.
9"
Max.
9"
Max.
34-1/2" - 35"
1-1/2"
1-1/2"
47-1/2" Min.
Note:If installing between frameless
cabinets, a 1/2" wide filler strip or side panel
may be required. The filler strip will act as a
23-3/4"
spacer between the door case and adjacent cabinet
and will prevent interference with cabinet door swing.
The width of the opening must include filler panels.
Note: Additional cutout width may be required for
models with custom panels.
The cutout depth must be 24"
• Both models can be installed flush with stardard cabinetry.
• Designed to be built-in only. Cannot be used free-standing.
• White case and drawer sides, black vented toekick with
optional stainless steel toekick supplied.
Additional Specifications:
• A 120 volt 60Hz., 15 or 20 amp power supply is required. An
individual property grounded branch circuit or circuit
breaker is recommended. Install a properly grounded 3-
prong electrical receptacle recessed into the back wall as
shown. Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 12/07
120032
ZIDI240WII
GE Monogram® Double-Drawer Refrigerator Module
(Custom panel required)
ZIDS240WSS
GE Monogram Double-Drawer Refrigerator Module
(Stainless steel)
Features and Benefits
• Full-Extension Slide-Out Refrigerated Drawers -
Storage for everything from while melons to 146
12 oz. cans
• Electronic Adjustable Temperature Control -
Offers a range of temperatures for precise chilling
• LED Temperature Display - Allows you to monitor
the temperature at a glance
• Full-Width LED Lighting - Puts contents into
clear view
• Custom Panel and Handle Required - Customer
must install a custom door panel and handle to
complement their décor (ZIDI240WII only)
• Adjustable Dividers - Maximizes usable storage
space and flexibility
• Removable Drawer Bin - Convenient for
separating loose items
• Fold-Down Shelf - Maximizes usable storage space
• Model ZIDS240WSS - Stainless steel
• Model ZIDI240WII - Custom panels and handles
required
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 12/07
120032
|