™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
Approved _______________________________
Date ____________________________________
Specification Line®
Self-Contained Solid Door Heated Roll-In
Models
One section Two section Three section
SSHRI1-S
SAHRI1-S
SMHRI1-S
SSHRI2-S
SAHRI2-S
SMHRI2-S
SSHRI3-S
N/A
Stainless exterior and interior full door
Stainless exterior and aluminum interior full door
Stainless front aluminum exterior and interior full door
N/A
Options &
Accessories
Standard Features
•
•
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior
(SA)
•
•
•
•
•
•
•
Security (prison) package
Door field rehingability
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
•
Aluminum interior and exterior, stainless
front (SM)
•
•
•
Built in door locks with heavy duty strikes
Recessed metal door handle
Exterior digital thermometer with high/
low temperature alarm
•
•
•
Easy to use electronic control
Easy access “flip up”shroud
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
•
•
•
Stainless steel breaker strips
Stainless steel interior door liner
Two year parts & labor warranty
SSHRI2-S
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular fins. High speed blower provides uniform airflow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/off switch is located on
the front exterior of the cabinet.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed floor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Each section can accommodate a 28 1/2”x 27 1/4”x 72”cart.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self
closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Fax: 800-669-0619
Phone: 800-733-8948 or 989-773-7981
|