DG-27
Digital Keyless Entry System
92.7
55
137.3
DG-27WP
(Waterproof Keypad)
DG-27
Unit: mm
40
Features
Allows up to 49+50 PIN codes
Specifications
Dual relays output for multi-control
Door Reed Switch Input for Anti-Trailing
Fully Programmable via keypad and master code
3 LED display with audible indication
Non-Volatile Memory
Operating Voltage: 12~24 Vdc
Current Draw: Average 15mA, Peak 60mA @ 12Vdc
Input: request-to-exit, time out reed switch contact
Output: Dual relays, N.O./N.C./Com. Output (free voltage
contact)
Relays Rating: 2A MAX @30Vdc , 0.4A @ 120Vac
Relay Activation Time:(*100,*200(
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
Memory Volume: 49+50 PIN codes
Relay 1 is controlled by 001~049 user slots
Relay 2 is controlled by 050~099 user slots
PIN codes: 5 digit codes only
Invalid PIN Lock-out
Durable Stainless Steel Faceplate
With vandal resistant screws
Optional with Water-proof Keypad
Operating Temperature: -20~+70C
Ambient Humidity: 5~95% relative humidity non-condensing
Factory Master Code: 12345
Statement
Invalid PIN Lock-out: The system will shut down for 60
seconds while 32 codes of incorrectly Master Codes enrolled
or PIN codes attempted(None beeper signal of keypad
activations)
EPROM:Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Color: Beige White
The DG-27 is a dual relay digital code-operated for access
control keypad with up to 49+50 individual user PINs, user
access PINs ensure that all functions controlled to authorized
persons only. The door reed switch Input is used to time out
the timer when door is moved for Anti-Trailing.
Logical memory can prevents unauthorized persons from
gaining PIN code entry by trial and error, The system will shut
down for 60 seconds while 32 codes of incorrectly Master
Codes enrolled or PIN codes attempted（None beeper signal
of keypad activations）.Stailess steel die casting housing with
vandal resistant screws to seize every security measures of
the unit; an elegant contour dedicated with fashion coating
which leads DG-27 for matching up-to-dated door stile for
compensable application to the worldwide trend. The DG-27 is
highly reliable, warranted for life and capable of providing the
best read range in its class.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-27 Ver. D Published on 2008.05.06
|