Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Induction Green Heat
Garland Induction Built-in Unit RTCSmp Module-Line “Two Cooking Zones”
Models:
GI-MO/DU 7000-650
GI-MO/DU 7000-720
GI-MO/DU 10000-720
GI-MO/DU 10000-650
Garland Modular Induction built-in concept
with two cooking zones consisting of:
Induction generator, coil carrier sheet with
coils and sensors, Ceran glass, control unit,
as well as operation and cable kit.
Equipped with the latest RTCSmp (Realtime
Temperature Control System) technology.
Standard Features
Induction generator:
Coil Carrier Sheet:
Compact design with induction coils and sensors. Engineered
specifically for modular kitchen designs.
A powerful generator that is fully integrated in an enclosed
housing and equipped with an integrated fan.
Round Coil: One pan is used for each heat-zone. Round coils
have higher power density and energy efficiency.
All connections such as the mains cable, operation, CAN
cable and sensor cable can be connected externally
through plug connections.
Safety above all:
The generator is equipped with an air ducting system,
through which the heated air is exhausted. Using this
design, the risk of a thermal short-circuit is reduced.
• RTCSmp electronic temperature control that monitors the
state of the induction coils, ceramnic glass, heat sink and
electronics.
Control unit:
• RTCSmp monitors the energy supply.
The control unit is the information and diagnostic hub for
the whole induction unit. It is connected with the generator
via RJ45 cable. Compact design and easy to install using
special installation tabs/brackets.
• Using a special control, interference noises are prevented
when operating multiple cooking zones.
• Limiting the energy supply at peak load.
• Automatic monitoring when not cooking, also when using
pans with a sandwich base.
Operation unit:
The power switch regulates the temperature in power levels
1 to 12. Simple to operate; adjust the temperature setting
simply by turning the knob.
• IR interface with diagnostic system.
Optional Features
Mounting Frame:
• Cable kit: 4m (SKU# 95000241) or 6 m (SKU# 95000242).
Installation/mounting frame is included with unit.
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with
UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES-001
Garland Commercial Ranges Ltd.
1177 Kamato Road,
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Mississauga, Ontario
L4W 1X4 CANADA
Canada or USA Parts/Service 1-800-427-6668
Mounting Frame 375 x 650 mm
Mounting Frame 360 x 720 mm
Garland Commercial Ranges Ltd.
1177 Kamato Road,
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Mississauga, Ontario
L4W 1X4 CANADA
Canada or USA Parts/Service 1-800-427-6668
Mounting
Frame
Inch (mm)
Number
of Round
Coils
Power per
Cooking
Zone
Number of
Cooking
Zones
Ceran Glass
Inch (mm)
Size of Coils
Inch (mm)
Total
Rating
Model
010.63
(0270)
14.76x25.60x0.24
(375 x 650 x 6 )
14.76x25.60
(375 x 650)
GI-MO/DU 7000-650
GI-MO/DU 10000-650
GI-MO/DU 7000-720
GI-MO/DU 10000-720
2
2
2
2
3.5 kW
5.0 kW
3.5 kW
5.0 kW
2
2
2
2
7.0 kW
10.0 kW
7.0 kW
010.63
(0270)
14.76x25.60x0.24
(375 x 650 x 6 )
14.76x25.60
(375 x 650)
010.63
(0270)
14.17x28.35x0.24
(360 x 720 x 6 )
14.17x28.35
(360 x 720)
010.63
(0270)
14.17x28.35x0.24
(360 x 720 x 6 )
14.17x28.35
(360 x 720)
10.0 kW
Electrical Loading
Model
Watts
208/60/3
400/50/3
440/50/3
GI-MO/DU 7000
7000
22 amp
30 amp
11 amp
10 amp
GI-MO/DU 10000
10000
16 amp
15 amp
Technical Data
Generator housing: 23.62x14.17x2.58” (600 x 360 x 65.5 mm)
Network impedance (Zmax): 0.25 Ω
Air flow fan: 4238 ft3/h (120 m3/h maximum)
Cut out for air supply: 10.08 sq. in (6500 mm2, min)
Cable Kit: 8.2 ft (2.5 m)
Garland/ U.S. Range products are not approved or
authorized for home or residential use, but are intended
for commercial applications only. Garland/ U.S. Range
will not provide service, warranty, maintenance or
support of any kind other than in commercial applications.
Form# GI-MO/DU 7000/10000-650/720 (04/29/14)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Mississauga, Ontario
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
L4W 1X4 CANADA
|