AZ85H09DAC
GE® Vertical Packaged Terminal Heat Pump
Dimensions and Installation Information (in inches)
Minimum Clearances:
Front
• Allow 4 inches in front of unit. When determining closet depth, note that plenum
may protrude into closet up to 4 inches, depending on exterior wall depth.
Sides
32 1/4” H
• Allow 3 inches on each side of unit.
• For side access closets only: Allow 5 inches clearance to front of unit.
Platform
• An 8”-12” high, field-supplied platform is recommended for drain access.
23 1/8” W
Line Cord Connected Units
230/208 Volt
Power Connection Kit
Heater KW
RAK3152
2.55/2.09
15
RAK3202
3.45/2.83
20
RAK3302
5.00/4.10
30
Min. Circuit Amps
Recommended
Protective Device
15 Amp Time Delay
Fuse or Breaker
20 Amp Time Delay
Fuse or Breaker
30 Amp Time Delay
Fuse or Breaker
23 1/8” D
ZONELINE® WARRANTY*
LIMITED 2ND ThROUGh
WhAT IS COvERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor on
site to repair or replace any part
of the Zoneline that fails because
of a manufacturing defect.
5Th YEAR PARTS WARRANTY
For the second through the
fifth year from date of original
purchase, General Electric
will provide, free of charge,
parts that fail as a result of a
manufacturing defect. Parts
covered are fan motors, switches,
heater, heater protectors,
ADDITIONAL FOUR-YEAR
WARRANTY
compressor overload, solenoids,
circuit boards, auxiliary controls,
thermistors, frost controls,
capacitors and varistors. This is a
limited parts-only warranty, and does
not include labor or transportation
to and from the service shop.
For an additional four years from
the date of original purchase,
we will provide, free of charge,
parts and on-site service labor to
repair or replace any part of the
sealed refrigerating system (the
compressor, condenser, evaporator
and all connecting tubing) that
fails because of a manufacturing
defect.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
All warranty service will be
provided by our Factory Service
Centers or by our authorized
Customer Care® servicers
during normal working hours.
*SEE WRITTEN WARRANTY FOR DETAILS
Specification Created 1/10
390634
|