ZGG420NCPSS - Natural Gas Free-standing Outdoor Grill
ZGG420LCPSS - LP Gas Free-standing Outdoor Grill
Dimensions and Installation Information (in inches)
42" Outdoor Grills
12" Min. to Combustibles
4" Min. Clearance for Lid
to Non-Combustibles
These grills are one-piece welded construction and
portable.
• Use the grill in a location that is level and stable.
The minimum clearances to combustibles must be
observed at all times:
15-1/2" (both sides)
• Allow at least 12" minimum clearance at the
back of the grill when the exhaust is directed to a
window or surface that is difficult to clean. Allow
at least 4" clearance to non-combustible surfaces
behind the grill to allow the hood lid to open.
51"
• Allow 12" minimum clearance on both sides
and the back of the grill to adjacent vertical
combustible construction.
• These gas grills cannot be used below any type of
overhead construction.
27"
41-7/8"
• These grills are designed for outdoor use only. Do
not locate the cooktop in a building, garage or
other enclosed or semi-enclosed area.
• Locate the backside of the grill away from
prevailing winds and avoid cooking in windy
conditions.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 10/08
170138
|