®
Easy Touch Can Opener
Item Stock Number
GE106613
UPC:
681131066136
Item Stock Number
GE106693
UPC:
681131066938
For product service, call customer service at (877) 207-0923
GE106613: 681131066136 • GE106693: 681131066938
How to Open Cans
2. Raise piercing lever, tilt can so that
the rim of the can rests on the edge
of the feed wheel, lower the lever
until the blade pierces the can.
3. Press lever down all the way to pierce
lid and start cutting action. “Power
Pierce” feature: When you press
1. Plug cord into 120 volt, AC outlet.
opened. (It is normal for motor to
occasionally continue cutting action
for a few seconds after lid has been
completely severed.)
5. To remove can, grasp can firmly and
raise lever. Carefully slide lid from
magnet and dispose of properly.
PLEASE NOTE: To open cans over 2 lbs.,
lever, motor will start rotating can for hold top of can opener to stabilize it. Unit
easier piercing.
will not open rimless cans. If there is a
dent in the rim of the can, open other end.
Never open or eat the contents of a
dented, bulging or punctured can.
4. Let go of lever and can opener will
continue cutting and will stop
automatically when can has been
How to Sharpen Knives
Do not attempt to sharpen hollow ground blades or those with serrated edges.
1. Be sure knife is clean and free of
grease.
2. Place heel of knife into the guide
slot located on the side of the can
opener. Lightly draw the blade
towards you, applying a slight
downward pressure. Repeat this
procedure four to five times to put
on a “factory sharp” edge.
How to Clean Blade Assembly
Never submerge can opener in water.
1. Unplug cord.
HINT: Cutting mechanism may collect food
or paper from can labels, and should be
cleaned frequently to maintain optimum
performance.
2. Wipe can opener with a damp cloth.
Clean around blade area with
toothpick or cotton swab if
necessary.
Two Year Limited Warranty
What does your warranty cover?
• Any defect in material or workmanship.
by you.
• Ship to:
CUSTOMER SERVICE DEPARTMENT
233 Fortune Blvd,
For how long after the original purchase?
• Two years.
Milford MA 01757
• Shipping and handling charges: $5.00
What will we do?
• Provide you with a new, or at our option, a
reconditioned unit.
• The exchange unit is warranted for the
remainder of your product’s original two-
year warranty period.
What does your warranty not cover?
• Customer instruction. This instruction
manual provides information regarding
operating instructions and user controls.
For additional information, ask your
dealer.
How do you make a warranty claim?
• Commercial use.
#
• Return product to nearest WAL MART
• Damage from misuse, abuse, or neglect.
• Products which have been modified or
incorporated into other products.
• Products purchased or serviced outside
the USA.
store or ship unit via UPS Ground Service
CUSTOMER SERVICE DEPARTMENT
233 Fortune Blvd,
Milford MA 01757
• All parts of this product are guaranteed
for a period of two years as follows:
– Within the first 24 months from date of
purchase, subject to the conditions below,
manufacturer will repair or replace the
product if it is defective in workmanship
providing it is returned to manufacturer,
freight prepaid, with PROOF OF
How does state law relate to this warranty?
• This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.
What if you purchased this product in the
USA and encounter a problem while using
it outside the USA?
• Follow the shipping directions provided
for warranty claims.
PURCHASE and date, together with $5.00
for return shipping and handling charges.
• Carefully pack the item in its original
carton or other suitable box to avoid
damage in shipping. We recommend
using the original carton and packing
materials.
For products purchased outside the United
States and Canada, see dealer for warranty.
#
WAL MART Stores, Inc.
• Before packing your unit for return, be
sure to enclose: your name, full address
with zip code and telephone number, a
dated sales receipt or PROOF OF
PURCHASE (if the unit was a gift, provide
a statement and the date received), your
$5.00 check for return shipping and
handling, and the model number of the
unit and the problem you are having.
(Enclose in an envelope and tape directly
to the unit before the box is sealed).
• Manufacturer recommends you ship the
package U.P.S. ground service for tracking
purposes.
Bentonville, AK 72716
is a trademark of
General Electric Company
and is used under the license by
#
WAL MART Stores, Inc.
Bentonville, AR 72716
• All shipping charges must be prepaid
#
WAL MART Stores, Inc.
428-944/106613/106693
6/00
Bentonville, AR 72716
|