ENCOUNTER
SPEAKERS
EN-FR4020, EN-FR52520, EN-FR6520, EN-FR6530
EN-FR4620, EN-FR5720, EN-FR6920, EN-FR6930
Speaker Parameters
EN-FR4020
120 Watts
35 Watts
EN-FR52520
140 Watts
40 Watts
72Hz - 21kHz
4 Ohms
EN-FR6520
180 Watts
50 Watts
EN-FR6530
200 Watts
55 Watts
Max Power Rating
RMS Power Rating
Frequency Response
Impedance
75Hz - 20kHz
4 Ohms
63Hz - 21kHz
4 Ohms
63Hz - 22kHz
4 Ohms
Sensitivity
86 dB
87 dB
87 dB
87 dB
Mounting Depth
Mounting Diameter
47mm (1-5/8”)
50mm (2”)
60mm (2-3/8”)
60mm (2-3/8”)
93mm
(3-11/16”)
120mm
(4-3/4”)
130mm
(5-1/8”)
130mm
(5-1/8”)
EN-FR4620
120 Watts
35 Watts
90Hz - 20kHz
4 Ohms
EN-FR5720
180 Watts
50 Watts
52Hz - 21kHz
4 Ohms
EN-FR6920
240 Watts
70 Watts
46Hz - 22kHz
4 Ohms
EN-FR6930
260 Watts
75 Watts
47Hz - 22kHz
4 Ohms
Max Power Rating
RMS Power Rating
Frequency Response
Impedance
Sensitivity
86 dB
86 dB
88 dB
88 dB
Mounting Depth
49mm
59mm
76mm
76mm
(1-15/16”)
(2-5/16”)
(2-31/32”)
(2-31/32”)
Mounting Diameter
140mm (5-1/2”) 180mm (7-1/16) x 233mm
233mm
x 87mm (3-
7/16”)
128mm
(5-1/16”)
(9-3/16”) x
153mm (6”)
(9-3/16”) x
153mm (6”)
Installation Guidelines
1) Ensure there is adequate clearance and depth for the speaker to be mounted
2) Use the supplied template to mark out and cut the correct diameter hole
3) Drill four holes for the mounting screws
4) Separate the grille from the frame
5) Insert the speaker and grille frame and affix with the screws provided
6) Complete installation by replacing the grille into the grille frame
(see diagram on reverse side)
|