24V DRIVEN RECEIPT PRINTER UNIT
2” PRINTER UNIT
FTP-622UCL510 / USL547
■ OVERVIEW
The FTP-622 UCL/USL Series is 24V driven receipt printer unit
with cutter for 2 inch wide paper. The unit has our high-speed
FTP-622 MCL mechanism, cutter and control board, with an
integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as
POS, ATM, and receipt and ticket issuing printers for various
other equipment.
■ FEATURES
• Unit supported (mounting is easy)
• High speed printer (80mm / sec.)
• Auto cutter included
• Paper near end-detection function
• Low power consumption
■ DESIGNATION
Item
Part number
FTP-622UCL510*1
FTP-622USL547*2
FTP-622Y201
Printer module
Interface
Parallel (Centronics)
Serial (RS-232C)
Parallel interface
Cables
Serial interface
FTP-622Y301
Power for head, motor and logic
FTP-622Y401
*1: Interface board is FTP-622DCL111
*2: Interface board is FTP-622DSL112
1
FTP-622UCL510 / USL547
(Continued)
Item
Operating temperature 0 to +50°C*
Specifications
2
Operating humidity
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
Environmental
conditions
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
Detection
By microswitch
Near end paper
By mechanical switch
For front insertion use (58 mm width)
Recommended papers
· Oji Paper
: FTP-020P0701/P0102
Recommended thermal sensitive paper
: PD150R,PD160R-N,PD170R
: TF50KS-E,TF60KS-E,
TF50KS-E4
· NIPPON Paper
· MITSUBISHI Paper Mills
: P220VBB-1,AFP-235
*1: 24VDC, minimum head resistance.
*2: Guarantee: +5°C to +40°C.
■ FUNCTIONS
Item
Item
Head voltage abnormality detection
Cutter abnormality detection
Motor power saving function
1.
2.
3.
4.
5.
6.
Test print function
7.
8.
9.
Paper out detection
Paper near end detection
Head up detection
10. Mark detection function
Thermal head temperature abnormality detection 11. MCU operation abnormality detection
Blow-out fuse detection 12. Bar code
■ INTERFACE , COMMAND, OPTIONS
Please refer to the FTP-622DCL111 for the FTP-622UCL510, and the FTP-622DSL112 for the
FTP-622DSL547.
Interface command options, please see FTP-622DCL/DSL datasheet.
3
FTP-622UCL510 / USL547
■ DIMENSIONS
Integrated unit
Note:
1. Nominal value
2. Distance from paper roll to enclosure must be 20mm for loading.
3. Basic reference line.
4
FTP-622UCL510 / USL547
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
5
|