Specifications — SW2 ARxi and SW4 ARxi Switchers
Video
Gain ............................................... Unity
Bandwidth .................................... 350 MHz (-3dB)
Switching speed ........................... 5 mS (max.)
Video input
Number/signal type ................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) RGBS, RGsB, RsGsBs, component video, S-video,
NTSC/PAL/SECAM composite video
Connectors .................................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) x 4 BNC female
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... -30dB @ 5 MHz
Video output
Number/signal type ................... 1 RGBS, RGsB, RsGsBs, component video, S-video, NTSC/PAL/SECAM
composite video
Connectors .................................... 4 BNC female
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... Analog RGBS, RGsB, RsGsBs
Output type .................................. RGBS, RGsB, RsGsBs
Standards ...................................... NTSC, PAL, SECAM
Input level ..................................... 1V to 5V p-p
Output level.................................. 5V p-p
Input impedance.......................... 510 ohms
Output impedance ...................... 75 ohms
Polarity .......................................... Positive and negative
Control/remote — switcher
Contact closure ............................ 1 25-pin D female connector
Extron remote key pad control .. 1 25-pin D female connector ........... use with the Extron KP-10
IR controller module ................... 1 25-pin D female connector ........... use with the Extron IR-101
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount................................... Yes (2U high, ½-rack width), with optional shelf, part #60-030-01
Enclosure type.............................. Metal
Enclosure dimensions ................. 3.4" H x 8.4" W x 6.25" D
8.5 cm H x 21 cm W x 16 cm D
(Depth excludes connectors.)
Shipping weight........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Approvals ..................................... UL, CUL, CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
(7.2-052101-D3)
1-2
SW2 ARxi and SW4 ARxi Switchers • Specifications
|