FDE7970E
FDG8970E
OPERATING INSTRUCTIONS
Operating Steps
Cycle Selection
Versión en español
Read Drying Procedures in your Owner's
Guide. It explains these operating steps in detail.
Always follow directions on fabric care labels.
Si desea obtener una copia en español de estas
InstruccionesdeFuncionamiento,sírvaseescribir
a la dirección que se incluye a continuación.
Solicite la P/N 131613500.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, orsimilarlytextured, rubber-
like materials. Use Air Fluff-No Heat setting only.
1. Prepare items for drying.
2. Check that lint screen is clean and in
place.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
Turn cycle selector clockwise to desired cycle and
setting. Each cycle ends with a cool down period.
The heat automatically turns off and the load
continuesto tumble for5-10 minutes. Thisreduces
wrinkling and makesitemseasierto handle during
unloading.
Dublin, Ohio 43017-0961
4. Close the dryer door.
Before Operating Your Dryer
Read your dryer Owner' s Guide. It has
important safety and warranty information. It
also hasmanysuggestionsforbest drying results.
5. Turn cycle selector clockwise to desired
setting.
6. Start dryer. Push Start button for 2 seconds.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation
and electrical voltage or gas pressure can also
affect drying time.
7. A signal will sound at the end of the
cycle.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's
guide before operating this appliance.
8. Remove items immediately and hang or
fold.
(continued, reverse side)
9. Clean lint screen after every load.
Printed in U.S.A.
P/N 131640600 (9610)
|