QUICK START GUIDE
Built-in oven
SETTING THE CLOCK
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock setting.
If you want to set the clock later, follow the steps under ‘To change the time’.
NZ AU GB IE
Keep this document handy for easy reference.
When the oven is first switched on at the wall
To change the time
(within the user preference menu)
For detailed information on the other features of your oven, see your ‘User guide’.
Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’
booklet.
YOUR OVEN
1
2
3
4
5
6
7
8
9
Control panel
9
1
10
Oven vent louvres
Step down oven wire shelf
Oven light
Telescopic sliding shelf (x2)
Side rack
Oven wire shelf
Oven door and handle
Oven seal
The display will flash 24 Hr.
1
2a Press the right scroll button to scroll
between 24 Hrand 12 H
2b Press the select button to confirm.
1
Press and hold the left and right scroll
buttons together for 3 seconds
to enter the user preference menu.
r
11
12
2
The display will either show 12 Hror 24
H
r
3
4
13
14
2
3
Press the select
button to confirm.
The display will flash.
Follow steps 2-5 left to set the time.
OB60SL11DCPX1
OB60SL11DEPX1
5
6
7
Accessories:
At step 2a, you also now have the
ability to scroll between 24 Hr,
12 Hr and OFF (turns the display off).
Refer to the User guide to learn more
about this feature.
10 Meat probe
11 Grill rack
12 Smokeless grill tray
13 Deep Roasting dish
14 Flat baking tray
3
Press the left and right scroll
buttons to set the time.
4
Press the select
confirm.
button to
8
THE CONTROL PANEL
FIRST USE
Function dial
Function halo
Temperature
indicator
Temperature
dial
Function indicators
(see ‘Oven functions’)
Your oven comes with one wire shelf, two telescopic sliding shelves and a drop down wire shelf.
The following shows you how to remove and reposition the shelves to your preferred position
We recommend you then condition the oven.
Temperature
halo
FUNCTION
TEMPERATURE
1 REMOVE ALL CABLE TIES & PACKAGING
HOLDING THE SHELVING IN PLACE
2 REMOVE SHELVES FROM THE OVEN
1
2
Remove all the shelving, taking special care with the telescopic
sliding shelves.
To remove a telescopic sliding shelf, grip it at the front (making
sure you are gripping the wire shelf and the sliding frame
Rotisserie indicator
(see ‘Using the
Rotisserie’) in the
User guide
Timer indicator
(see ‘Using the
timer’)
together), lift upwards and pull it out of the oven.
For your safety, the wire shelf and telescopic sliding frame are
built together as one unit and are not separable.
Cooking time indicator (see ‘Automatic cooking’) in User guide
if lit:
Timer is
counting down
if lit:
Rotisserie is
in use
Control lock indicator (see
‘Locking the control panel’)
if lit:
Automatic cooking time is set
Display
if lit:
Control panel is locked
Meat probe indicator
(see ‘Using the meat probe’) in User guide
Locking the control panel
if lit:
To lock, press and hold the select
button for 2 seconds.
To unlock, press and hold the
Meat probe is in use
(display will alternate between probe set
temperature and internal temperature
of the meat)
cancel
button for 2 seconds.
Stop time indicator
(see ‘Automatic cooking’) in User guide
Scroll
Select
Cancel
Door lock indicator
if lit:
if lit:
Door is open when Self
Clean function selected.
Automatic stop time is set
See ‘Using the Self Clean
function’ in User guide.
continued over
|