Signal ProceSSorS
—
Sync ProceSSorS
SS 200
™
Sync Stabilizer with ADSP
FeatUres
video oUtPUt
•
•
•
•
Input: Female BNCs for RGBHV, RGBS, RsGsBs, or RGsB
Dual output: Female 15-pin HD and female BNCs for RGBS or RGBHV
300 MHz (-3 dB) RGB video bandwidth
Number / Signal type............ . 1 RGBHV, RGBS
Connectors........................ . 5 BNC female, (1) 15-pin HD female
Nominal level..................... . 0.7 Vp-p for RGB
Minimum / Maximum levels... . Analog: 0.5 V to 1.8 Vp-p
Impedance......................... . 75 ohms
Compatible with any analog RGB signal with horizontal frequency between 30-
145 kHz and vertical frequency between 30-170 Hz
sync
Input type.......................... . RGBHV, RGBS, RGsB
Output type........................ . RGBHV, RGBS
Input level......................... . TTL: 5 Vp-p
Output level....................... . TTL: 5 Vp-p, unterminated
Input impedance................. . 75 ohms or 510 ohms, selectable
Output impedance............... . 75 ohms
ADSP™ - Advanced Digital Sync Processing
•
•
•
•
Strips sync on green
Horizontal shift control
Min. / Max. input voltage....... . 2 V to 5 Vp-p
Polarity............................. . Positive or negative (follows input), or force to negative out (switch-selectable)
DIP switches for horizontal shift, restoration or removal of serration pulses, and
input termination
general
External power supply.......... . 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable;
to 12 VDC, 0.5 A, regulated
Power input requirements...... . 12 VDC, 0.2 A
Temperature / Humidity......... . Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount....................... . No, but furniture mountable with included or optional brackets
Enclosure type.................... . Metal
•
•
•
Detachable bracket included for mounting near a projector
Optional under-desk and through-desk mounting kits available
External international power supply included, part # 70-055-03
Enclosure dimensions........... . 1.3" H x 5.7" W x 4.5" D
3.3 cm H x 14.5 cm W x 11.4 cm D
Product weight................... . 1.1 lbs (0.5 kg)
Shipping weight.................. . 3 lbs (2 kg)
Vibration........................... . ISTA 1A in carton (International Safe Transit Association)
Listings............................. . UL, CUL
Compliances...................... . CE, FCC Class A
MTBF............................... . 30,000 hours
Warranty........................... . 3 years parts and labor
NOTE: All nominal levels are at 10%. Specifications are subject to change without notice.
descriPtion
The Extron SS 200 is a 300 MHz (-3 dB) Sync Stabilizer that accepts RGsB, RGBS, or RGBHV
and outputs digitally restored RGBHV or RGBS. It outputs simultaneously on a set of five BNC
connectors and a female 15-pin HD connector so the user can send output to the projector
no matter what type of input connector the projector uses. Digital displays — such as LCD,
DLP™, and D-ILA®/LCoS — often have trouble with sync signals that have been altered through
previous processing. The SS 200 uses Extron's ADSP™ - Advanced Digital Sync Processing to
re-establish the proper timing relationship between the video signal and the sync signal, so that
problems are prevented. Other applications include converting RGsB or RGBS to RGBHV, since
many digital displays require an RGBHV input.
Projector
Mounting
Bracket
VGA/RGBHV/RGBS
Output To Projector
Extron
SS 200
Sync Stabilizer
RGsB or
RGBS
Input
sPeciFications
video
Gain................................. . Unity
Bandwidth......................... . 300 MHz (-3 dB)
video inPUt
Number / Signal type............ . 1 RGBHV, RGBS, RGsB
Connectors........................ . 5 BNC female
Nominal level..................... . 0.7 Vp-p for RGB
Minimum / Maximum levels... . Analog: 0.4 V to 1.8 Vp-p with no offset at unity gain
Impedance......................... . 75 ohms
Horizontal frequency............ . 30 kHz to 145 kHz
Vertical frequency................ . 30 Hz to 170 Hz
DC offset (max. allowable)........ . 1.0 V
Model
version descriPtion
Part #
MsrP
SS 200
Sync Stabilizer with ADSP.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-285-01
$960
oPtional accessories
Model descriPtion
Page
Part #
MsrP
MBU 125
MBD 129
1U, 1/2 & 1/4 Rack Width, Under-Desk Mount Kit for Two-Piece Enclosure.. . . . . page 756
1U, 1/2 & 1/4 Rack Width Through-Desk Mount Kit for Two-Piece Enclosure.. . . page 757
70-077-01
70-077-02
$50
$50
541
USA
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Asia
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
© 2006 Extron Electronics. All rights reserved.
714.491.1500 / 800.633.9876
714.491.1517 FAX
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
Pricing and specifications may change without notice.
|