Recipe
Booklet
Reverse Side
INSTRUCTION BOOKLET
PowerBlend Duet™ Blender/Food Processor
BFP-10 Series
U IB-7176
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
ꢀ5. Wash the blender jar, food processor work bowl, food
processor chopping blade, locking ring, and covers before
first use.
6. Remove the bottom corrugated insert containing the blender jar
assembly. Be careful not to tip the jar when removing.
7. Last, remove any additional literature from the box.
26.WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK
OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE
DONE ONLY BY AUTHORIZED PERSONNEL.
CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ
Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BLENDER
27. WARNING: FLASHING LIGHT INDICATES READY TO
OPERATE. DO NOT TOUCH BLADES.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Parts and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Helpful Reminders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quick Reference Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dos and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FOOD PROCESSOR
NOTICE
This appliance has a polarized plug (one prong is wider than the
other). To reduce the risk of electric shock, this plug will fit into a
polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify
the plug in any way.
Parts and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly for Chopping, Puréeing & Mixing . . . . . . . . . . . . . 8
Assembly for Slicing & Shredding . . . . . . . . . . . . . . . . . . . . . 9
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chop, Purée & Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adding Food While Processing. . . . . . . . . . . . . . . . . . . . . . . 10
Removing Processed Food . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cleaning and Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Guidelines for Preparing Foods for Chopping . . . . . . . . . . . 11
Guidelines for Preparing Foods for Slicing and Shredding . 1ꢀ
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Maximum rating of 500 watts is based on the jar attachment, which
draws the greatest power. Other recommended attachments may
draw significantly less power.
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart® PowerBlend Duet™
on a flat, sturdy surface before unpacking.
ꢀ. Remove the instruction booklet and other printed material from
top of corrugated insert.
3. Next, remove the top corrugated insert containing the fill cap.
4. Carefully lift the blender base from box and set aside.
5. Carefully lift the top corrugated insert of the food processor
accessory. It containing the adapter stem, and slicing/shredding
disc. Carefully remove slicing /shredding disc as it is very sharp,
then remove adapter stem.
3
1
2
8. 7-Speed Touchpad Control
with Indicator Lights
INTRODUCTION
You’ll love everything your PowerBlend Duet™ lets you do. You can
prepare a whole meal in this combo blender/food processor. This
super-size blender and genuine Cuisinart® food processor have
preprogrammed functions to guarantee perfect results whether
you’re slicing cucumbers, chopping meat, or puréeing peaches.
Does the time consuming tasks, so you have time for
the fun stuff!
Easy to use, read and clean.
Seven speeds give you great
versatility – use low speeds
for delicate blending all the way
up to high speeds for cheese,
garlic, or lemon zest. The red
LED lights clearly indicate what
blender speed you are using.
3
BLENDER PARTS AND FEATURES
8a. Ice Crush Button
1. 2-oz. Measured Pour Lid
(Blender Only)
Allows you to measure and add ingredients neatly without
removing the cover.
6
7
Activates the ice crushing speed.
This button is preset to the best
speed for crushed ice. However,
you can crush ice at any speed.
The food processor attachment
is not intended to crush ice.
Use the blender jar for this.
2. Cover
Just press on; no turning or twisting required. Tightfitting seal
resists leakage.
3. 56-oz. Glass Jar
Has a unique, sturdy, widemouth design.
8
8a
8b. Pulse Button
4. Leakproof Rubber Gasket (not shown)
Holds the glass jar snugly in position for safe operation.
Allows you to pulse at any
speed from high to low, so
you can blend ingredients
only as much as needed.
9
5. High-Quality Cutting Assembly with Patented Stainless
Steel Blades (not shown)
Is strong enough for all blender tasks, including tough jobs,
from ice crushing to chopping delicate herbs.
8b
8c
8c. Food Processor Button
Is preset to the best speed for all food processing tasks.
Always use this button when food processing. This speed may
also be used with blender jar.
Note: Blades are very sharp...handle carefully.
6. Collar
Collar is self-aligning so that the glass blender jar slides easily
into position, eliminating the frustration of twisting and turning
the blender jar to lock it into place.
9. Slip-Proof Feet
Prevent movement during use and prevent damaging marks on
countertops or tables.
7. Heavy-Duty Motor Base
10. Hidden Cord Storage Compartment (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
Motor base is so sturdy and stable, it will not “walk” on your
counter – even during ice crushing! The motor is strong enough
to handle all blending tasks, including crushing ice without
liquid, and is backed by a three-year limited warranty.
11. Impact-Resistant Plastic Housing
Is crafted of the finest quality materials to resist staining,
cracking, and odors.
12. Innovative Cuisinart Design
Combined with power, performance, sturdiness, and easy
cleanup, makes this blender a winner.
4
•
•
Do not twist locking ring from blender jar when removing
blender jar from base. Simply lift blender jar from motor base.
BLENDER ASSEMBLY
To use your Cuisinart® PowerBlend Duet™, begin by assembling
the blender jar.
Boiling liquid or solid frozen foods (with the exception of ice
cubes or ½" pieces of frozen fruit) should never be placed in
the blender jar.
d
1.Turn the blender jar (a) upside
down, and place it flat on a
sturdy surface.
•
•
Do not place ice, frozen foods or very cold liquids in a blender
jar which has come directly from a hot dishwasher.
ꢀ. Position the rubber gasket (b)
on the round opening on the
bottom of the blender jar.
Do not place very hot liquids or foods in a blender jar which
has come directly from the freezer. Boiling liquids should cool
for 5 minutes before being placed in blender jar.
c
3. Turn the cutting assembly (c)
upside down, and place the
blade end in the blender jar
opening.
•
Follow Cleaning and Care instructions on page 7 prior to your
first use.
b
a
BLENDER OPERATING INSTRUCTIONS
Note: Blades are very sharp...
handle carefully.
1. Place the motor base of your Cuisinart® PowerBlend Duet™ on
a flat, sturdy surface. It is important that the surface be clean
and dry. Follow the instructions for assembling the blender jar
(see previous section). Once the jar is assembled and is in
position on the motor base, plug the Cuisinart® PowerBlend
Duet™ into an electrical outlet.
4. Secure the rubber gasket and cutting assembly in position by
placing the smaller opening of the locking ring (d) on top of the
cutting assembly. Engage threads by twisting the locking ring
clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right side up.
ꢀ. Add all necessary ingredients to the blender jar, and replace
the cover. You may add more ingredients by lifting the
measured pour lid and dropping ingredients through the fill
area. Replace the measured pour lid after adding ingredients.
Do not put hands into blender jar with blender plugged in.
5. Push the cover onto the top of the blender jar. Push the
measured pour lid into the cover.
NOTES: Add liquid ingredients first, then follow with solid
ingredients. This will provide more consistent blending
and prevent unnecessary stress on the motor.
6. Place the blender jar on the motor base so that the jar markings
are facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
To remove blender jar cover, lift edge of cover upward.
Lifting measured pour lid will not remove cover.
HELPFUL REMINDERS
3. TO START BLENDING: Press the On button. The red On
LED light will flash, indicating that the blender is turned on
but no speed has been selected.
4. PRESS THE DESIRED BLENDING SPEED: Both the On
indicator light and the activated speed indicator light will glow.
The blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button, by
simply pushing the next desired speed button.
•
Once the cover is in position, ingredients can be added during
blending by simply lifting the measured pour lid, adding
ingredients, and replacing the measured pour lid.
•
•
Cover should always be in place while the unit is ON.
Warning: Do not place blender jar on base while motor is
running.
5
5. TO STOP THE BLENDING PROCESS: Re-press the activated
speed button. The blending process will stop. The red On
indicator light will continue to flash to let you know that the
blender is still on and can be reactivated by pushing the
desired speed button. The blender can be completely
deactivated and stopped at any speed by pushing the Off
button. You will need to press the On button again to continue
blending.
QUICK REFERENCE GUIDE
FOR BLENDER FUNCTION
To Activate Blender
To Begin Blending
To Change Speeds
To Pulse
Press On – The blender is in On mode.
Press desired speed button.
Press desired speed button.
In On mode press Pulse,
then press and release desired speed
button as needed.
6. PULSE MODE: While the blender is turned on, you can create
a burst of power for quick, efficient blending, by activating the
pulse function. To do so, first push the Pulse button, which will
To Crush Ice
In On mode, press and release Ice
Crush button as needed.
To Stop Blending (and Deactivate Blender)
Press Off Button.
Release button.
To Stop Blending (in Pulse or Ice
Crush Mode)
To Stop Blending in Stir, Chop, Mix, Purée,
or Food Processor Mode
Press Speed button again. This will
return the blender to On mode. Press
Off button to turn blender off.
QUICK REFERENCE GUIDE
cause the pulse indicator light to flash. Next, push and release
the desired speed button. Repeat as desired. You determine
the duration of each pulse. While pulsing, all indicator lights
(the on, the pulse, and the desired speed lights) will glow. The
pulse function can be used to break apart larger pieces of food
or to control the texture of food when chopping. The pulse
function is also effective in starting the blending process when
you do not want continuous power, or when processing items
which do not require an extended amount of blending.
FOR BLENDER SPEED
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe
Speed
Result
Reconstituting frozen
orange juice concentrate
Stir
Smooth and full-bodied
Thick and creamy
Desired consistency
Coarse to fine
Mayonnaise
Salad dressings
Nuts
Stir
Stir
Chop
7. TO CRUSH ICE: The PowerBlend Duet™ motor is strong
enough to crush ice without liquid at any speed; however,
for your convenience, we have preset the best speed for ice
crushing. To give you greater control, the ice crush function
automatically operates as a pulse function. To crush ice, place
ice cubes in the blender jar, and place the cover and the
measured pour lid on the blender jar. Press the On button.
Press the Ice Crush button in short pulses until ice is crushed
to desired consistency. See the Recipe Tips section in recipe
booklet for more details.
Whipping cream
Bread crumbs
Grating citrus zest
Soups
Mix
Thick topping
Mix
Uniformly fine
Purée
Uniformly fine
Purée
Uniformly smooth
Smooth and creamy
Smooth and creamy
Smooth and creamy
Thick and slushy
Coarse to fine
Milk shakes
Baby food
Food Processor
Food Processor
Food Processor
Food Processor
Food Processor
Ice Crush
Health drinks
Frozen cocktails
Grinding hard cheese
Ice
8. TO DISLODGE FOOD: Use a rubber or plastic spatula to help
remove food lodged around the cutting assembly. DO NOT
USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER
OFF.
Snowy
6
DO’s AND DON’Ts WHEN USING
YOUR BLENDER
Replace the cover and measured pour lid and continue blending,
if necessary. Make sure spatula is not inside the blender jar before
blending.
9. WHEN FINISHED BLENDING: Press the Off button and
unplug the blender from the electrical outlet. Never remove the
blender jar from the motor base until the blender is off. Do not
twist locking ring from blender jar when removing jar from
motor base. Simply lift blender jar from motor base. Do not
place hands into blender jar with blender plugged in.
DO:
• Make sure the electrical outlet is rated at the same voltage as
that stated on the bottom of the blender motor base.
• Always use the motor base on a clean, sturdy and dry surface.
• Always add liquid ingredients to the blender jar first, then add
remaining ingredients. This will ensure that ingredients are
uniformly mixed.
CLEANING AND CARE
Always unplug your Cuisinart® PowerBlend Duet™ from the
electrical outlet before cleaning. The blender is made of corrosion-
resistant parts, which are easy to clean. Before first use and after
every use, clean each part thoroughly. Periodically check all parts
before reassembly. If any part is damaged or blender jar is chipped
or cracked, DO NOT USE BLENDER.
• When using either blender or food processor, cut most foods
into cubes approximately ½" to 1" to achieve a more uniform
result. Cut all cheeses into pieces no larger than ½".
• When using blender, use the measured pour lid to measure
liquid ingredients such as alcohol. Replace measured pour lid
after ingredients have been added.
Remove the blender jar from the motor base by lifting straight up
and away. Twist off the locking ring by turning counterclockwise.
Remove the cutting assembly and rubber gasket. Wash in warm
soapy water; rinse and dry thoroughly. Place the locking ring in
the upper rack of the dishwasher or wash in warm water.
• When using either blender or food processor, use a rubber or
plastic spatula as needed, only when the blender is turned OFF.
Never use metal utensils, as damage may occur to the blender
jar/work bowl or cutting assembly.
• Place blender cover on firmly. Always operate the blender with
the cover on.
CAUTION: Handle the cutting assembly carefully. It is SHARP and
may cause injury. Do not attempt to remove blades from cutting
assembly.
• Make sure locking ring is tightly attached to blender jar.
• Always remove locking ring, cutting assembly, and rubber gasket
before cleaning.
Remove the blender jar cover and the measured pour lid. Wash in
warm, soapy water; rinse and dry thoroughly, or place in the upper
rack of the dishwasher. The blender jar should be washed in warm
soapy water and rinsed and dried thoroughly. The blender jar can
also be placed upside down in the dishwasher.
• When scraping the blender jar with a spatula, remove the food
from the sides of the blender jar and place it in the center of the
blender jar, over the cutting assembly.
Finally, wipe the motor base clean with a damp cloth to remove
any residue, and dry thoroughly. Never submerge the motor base
in water or other liquid, or place in the dishwasher.
• When chopping fresh herbs, garlic, onion, zest, bread crumbs,
nuts, etc., make sure the blender jar and cutting assembly are
completely dry.
Tip: You may wish to clean your blender cutting assembly as
follows: Squirt a small amount of dishwashing liquid into
assembled blender jar and fill halfway with warm water. Run on
Stir for 15 seconds. Repeat using clean tap water. Empty blender
jar and carefully disassemble parts. Wash cutting assembly, gasket
and locking ring in warm, soapy water. Rinse and dry all parts
thoroughly.
• If food tends to stick to the sides of the blender jar or food
processor work bowl during use, pulse in short bursts.
7
DON’T:
FOOD PROCESSOR PARTS
1
2
• Don’t store food or liquids in your blender jar.
AND FEATURES
• When using blender, don’t place cutting assembly and locking
ring onto motor base without the blender jar attached.
1. Food pusher with oil dispenser
2. Work bowl cover with feed tube
3. Stainless steel chopping blade
• Blender or food processor will not mash potatoes, knead dough,
or beat egg whites.
4. Stainless steel reversible slicing/
shredding disc
• Don’t remove blender jar or food processor bowl while unit is
ON. Keep the blender jar or food processor cover on while
blending.
5. Adapter stem
6. Clear work bowl
7. Gearbox collar
• Don’t twist locking ring from blender jar when removing blender
jar from motor base. Simply lift blender jar from motor base.
3
• Don’t overprocess foods. Blender or food processor will achieve
most desired results in seconds, not minutes.
8. Motor base
Used for both the blender jar and
the food processor bowl
4
5
• Don’t overload blender or food processor. If the motor stalls, turn
OFF immediately, unplug the unit, and remove a portion of the
food; then continue.
FOOD PROCESSOR
ASSEMBLY
• Don’t use any utensil inside the blender jar or food processor
bowl while the motor is ON.
Please note that the bowl and collar will fit
on the base in eight different positions. The
handle can be in front or on either side and
the feed tube in front, back, or on either side.
Directions for use reference a certain
• Don’t use any container or accessories not recommended by
Cuisinart. Doing so may result in injury.
6
• Don’t place hands inside the blender jar or food processor bowl
when blender is plugged in.
• Don’t add boiling liquids or frozen foods (except ice cubes or ½"
pieces of frozen fruit) to glass blender jar. Boiling liquids should
cool for 5 minutes before being placed in blender jar.
position for instructional purposes only.
7
8
1. Hold gearbox collar in one hand and
work bowl handle in the other. Twist bowl
clockwise onto collar.
• The food processor accessory is not intended to crush ice. This
could damage the chopping blade and will damage work bowl.
ꢀ. Place collar with bowl onto motor base
with handle facing front.
Now follow directions below for either:
a) chopping, puréeing and mixing or
b) slicing and shredding
a) CHOPPING, PURÉEING & MIXING
1. Place chopping blade over shaft in work bowl. Chopping blade
should slide easily to the bottom of the bowl. Lower blade will
almost touch bottom of bowl.
8
BE SURE TO HANDLE THE METAL BLADE WITH CARE AS
IT IS RAZOR SHARP!
4. Plug your Cuisinart® PowerBlend Duet™ into a household
electrical outlet.
ꢀ. Place food to be processed in work bowl. Put cover on work
bowl, with feed tube at about 11 o’clock. Turn the cover
clockwise until it fits into position. Cover lock must click into
locked position prior to use. If you have trouble fitting the cover
on the work bowl, turn chopping blade hub slightly and replace
cover.
5. Insert pusher. Use moderate pressure to push down on pusher
with one hand while using your other hand to push the On
button, Pulse button, and hold down the Food Processor button.
Slicing and shredding only take a few seconds. Wait until disc
stops spinning before removing cover. When it stops, remove
cover before removing work bowl. Never try to remove cover and
work bowl together; this could damage work bowl.
3. ALWAYS USE PUSHER TO GUIDE FOOD THROUGH FEED
TUBE. NEVER USE YOUR FINGERS OR SPATULA.
6. To remove cover, unlock it by turning it counterclockwise, then
lift it straight up.
4. Plug your PowerBlend Duet™ into a wall outlet. Push the On
button and then the Food Processor button to start chopping
or puréeing. It is recommended that one hand be placed on the
food processor lid while in use, to provide unit stability. If the
machine doesn’t start, make sure it is plugged in and the work
bowl and cover are locked into place. The food processor will
not start until the collar, work bowl and work bowl lid are
locked into place. Nevertheless, always unplug the unit
before placing hands into the food processor bowl.
7. Remove slicing/shredding disc before removing work bowl.
To remove it, grasp flat top section of adapter stem and lift it
straight up. Holding work bowl collar, turn work bowl
counterclockwise and lift it straight up to remove it from base.
FOOD PROCESSOR OPERATING INSTRUCTIONS
Your PowerBlend Duet™ comes with a food processor button.
This button is the perfect speed for all your food processing tasks.
Always use this speed when using the food processor. You may
also use the Pulse button with this function for pulse-chopping.
NOTE: The motor base will start, but the food processor blade
will not turn until assembled properly.
To use your food processor, make sure that the bowl is assembled
properly and the blade or slicing/shredding disc and the cover are
locked into place.
b) SLICING AND SHREDDING WITH THE REVERSIBLE
SLICING/SHREDDING DISC
When you use the control panel, the LED will light next to each
button you press.
The slicing/shredding disc can slice and shred a variety of fruits
and vegetables, meats and cheeses.
Press the On button. For continuous operation, press the
Food Processor button. Motor will start if you have followed
assembly instructions.
1. Place adapter stem onto the center shaft. To slice: Attach disc
to stem with the raised edge of slicer on top. To shred: Attach
disc to stem with the raised shredding slots on top. Place the
slicing/shredding disc onto shaft with the desired cutting blade
facing up. Be sure to handle the metal blade with care, as it
is razor sharp.
To turn motor off, press the Food Processor button again or the
Off button.
ꢀ. Place cover on work bowl, with feed tube at about 11 o’clock.
Turn cover clockwise until it fits into position. Insert food in feed
tube.
3. Hold pusher with more rounded side toward the outside of the
bowl and insert it in feed tube over food. Always use pusher to
guide food through feed tube. Never use your fingers or spatula.
For on/off operation, called pulse-chopping or pulsing, press the
On button, press the Pulse button, and then press and release the
9
Food Processor button the desired number of times. Motor runs as
long as you hold the Food Processor button down. The motor stops
when you release control switch. Try it a few times.
New users are often surprised at how fast the processor works. You
will quickly get used to its great speed.
These are some conditions that affect your results:
You control the duration and frequency of pulses by the length of
time you hold the Food Processor button down and the rate at
which you press it. Pulses should be short bursts. Allow enough
time between pulses to let food in work bowl fall to bottom.
• Size of pieces you put in bowl – all should be about the same size.
• Amount of food you process – don’t add too much.
• Type of processing you choose – continuous or pulse/chopping.
Always use the Food Processor button for pulse/chopping.
Never turn cover back and forth to start and stop processor.
ADDING FOOD WHILE PROCESSING
To add liquid while the machine is running, pour it through the
open feed tube. This is especially useful when making mayonnaise
or dressings.
USING THE POWERBLEND DUET™ BLENDER/FOOD
PROCESSOR TO CHOP, PURÉE, AND MIX
Refer to Food Processor Assembly instructions on pages 8–9.
A small hole in the pusher allows you to add liquids in a very slow,
steady stream – useful when making sauces.
1. Cut food into ¾" pieces. You will get a more even chop if you
start with pieces that are all the same size. Put pieces into work
bowl with metal blade in place. You can put in up to 1 cup of
food at a time. If you want to process more, do it in batches.
When you want to add small pieces of food like cheese, meat or
garlic cloves while machine is running, drop them through open
feed tube.
ꢀ. Put on cover, lock it and insert pusher. It is recommended that
one hand be placed on the food processor lid while in use, to
provide unit stability. Press the On button, press the Pulse
button, and the Food Processor button (to pulse), then release.
Repeat two to three times. Each time blade stops, let food pieces
drop to the bottom of bowl before pulsing again. This ensures
that the blade will chop them at every pulse. Watch what happens
to the food. With pulse/chopping technique, you can get an even
chop without danger of overprocessing. Check texture
To prevent spills when adding sugar and other dry ingredients,
use a funnel.
REMOVING PROCESSED FOOD
Before removing processed food, press Off button and wait for
blade to stop spinning. Then remove cover by turning it
counterclockwise. Never try to remove cover and work bowl
together; this can damage work bowl.
It is important not to let metal blade fall out of work bowl as you
empty it.
by looking through work bowl. Be careful not to overprocess.
For a coarse chop, pulse only a few times.
Here are two ways to prevent it from falling
out:
3. If you want a finer chop or purée, press the On button and then
the Food Processor button and let machine run continuously
until the food is chopped as fine as you want it. Check frequently
through clear cover or bowl to avoid chopping too fine. Use a
plastic spatula to scrape down any pieces that stick to inside
of bowl.
1. Before tilting bowl, use spatula to remove
food from around blade. Carefully remove
blade by the plastic hub.
ꢀ. Hold top of blade in place with finger or
spatula while pouring out processed food.
Onions and other food with a high water content turn into a smooth
purée very quickly. Do not overchop – look at food frequently
through work bowl.
At this point, you may either lift the work bowl
off motor base, or hold the collar at the base and turn the handle of
the bowl counterclockwise and lift blade straight up.
To purée, follow same procedure as for chopping, but let machine
run until food is a smooth purée.
NOTES: Occasionally, a piece of food may become wedged
between the blade and the work bowl. If this happens, remove the
10
cover, lift the blade out carefully and remove the wedged piece.
Empty the bowl, reinsert the blade and lock the cover into place.
Process smaller amounts of the food at one time.
General Guidelines for Preparing Foods for Chopping
THE FOOD
HOW TO PREPARE IT
Fruits and vegetables
Peel and core if necessary. Remove large, hard
pits and seeds. Cut into ¾" pieces and process
up to 1 cup at a time.
Don't store food or liquids in the food processor work bowl.
CLEANING AND STORING
YOUR POWERBLEND DUET™
FOOD PROCESSOR ATTACHMENT
Meat, poultry and fish
These should be very cold but not frozen. First,
cut into ¾" pieces. Put up to ½ pound in work
bowl. If you want to chop or purée more, do it
in batches of not more than ½ pound each.
Pulse/chop or run continuously until desired
consistency is reached. Check texture every ꢀ
or 3 seconds to avoid overprocessing.
Store the chopping blade and slicing/ shredding disc as you
would sharp knives – out of the reach of children.
The work bowl, cover, pusher, chopping blade, and slicing/
shredding disc are top shelf dishwasher-safe. When placing
parts in your dishwasher, insert the work bowl upside down.
Remember where you place the sharp blade and disc, and
be certain to unload the dishwasher carefully.
Bread, crackers or cookies
Break into 1" pieces and process continuously
until texture for crumbs is fine. For seasoned
crumbs, chop with herbs. For buttered crumbs,
dribble melted butter through feed tube while
processing – 1 teaspoon melted butter for each
slice of bread.
The gearbox collar is not immersible. To clean, just wipe
with a damp cloth.
Crumb crusts
Chop crackers or cookies as described in
preceding paragraph. Add sugar, spices and
butter and cut into pieces, as specified
by recipe. Pulse/chop until combined.
If you wash the blades and discs by hand, do it carefully. Avoid
leaving them in soapy water where they may disappear from
sight. To clean the metal blade, fill the work bowl with soapy
water, hold the blade by its plastic center and move rapidly up
and down on the center shaft of the bowl. Use of a spray hose is
also effective. If necessary, use a brush.
Hard cheese “grated”
If it’s too hard to cut with a knife, don’t try to
chop it – it may damage blade. First cut into ¾"
pieces. Pulse/chop until pea-sized, then
process continuously. You can chop it as
coarse or as fine as you want. Simply run
machine longer for finer chop. Process up to 3
ounces at one time.
The work bowl should not be placed in a microwave oven.
Whipping cream
Processor-whipped cream works well for most
purposes. It is excellent as a topping for
desserts or hot drinks. Cream must be at
refrigerator temperature. You can whip up to
1 cup at a time. Do not use food processor
whipped cream to prepare soufflés or other
foods where volume is required.
Parsley and other fresh herbs
Work bowl and metal blade must be clean and
dry. Remove stems; use leaves only. Dry herbs
completely. The more herbs you chop at once,
the finer chop you can get. Chopped herbs
keep for several days in the refrigerator in
airtight bags, or can be frozen for months.
11
General Guidelines for Preparing Foods for Slicing and Shredding
Food
To Prepare for Slicing
To Prepare for Shredding
Long narrow foods like carrots, celery,
cucumbers and zucchini
Cut into even lengths about 1" shorter than height
of feed tube. Stand pieces upright in feed tube,
flat side down, adding enough pieces so they
cannot tilt.
For long shreds, cut into largest size that will fit
sideways in feed tube. Stack in feed tube to
about 1" from top. For shorter shreds, stand
pieces upright in feed tube, flat side down (as
described in slicing column).
Apples, onions, potatoes, peppers, tomatoes
and other large, round fruits and vegetables
Cut one end flat, then cut lengthwise into halves
or quarters. Pack solidly in feed tube to prevent
tilting. Fill feed tube to about 1" from top.
Use light to moderate pressure.
Same as slicing. Place in feed tube sideways for
longer shreds, or upright for shorter shreds.
Strawberries, mushrooms, radishes and other
small, round fruits and vegetables
Slice off top and bottom, leaving center section.
Place in feed tube, flat side down.
Same as slicing. Radishes shred well.
Do not shred.
Cabbage, iceberg lettuce
Cut off top and bottom, leaving center section.
Cut into wedges to fit feed tube upright. Remove
core. Cut top and bottom pieces into similar
wedges.
Uncooked meat and poultry
(8 oz. maximum at one time)
Use boneless cuts. Cut into feed-tube lengths.
Remove skin if desired. Wrap in plastic wrap and
put in freezer until it feels hard when you try to
squeeze it but is still easily pierced with tip of
sharp knife. Remove plastic wrap and stand
pieces upright in feed tube. Note: Chicken and
beef for stir-fries should be sliced with the grain.
Boned, skinned chicken breast will usually fit
when frozen as described above and cut in half
crosswise.
Same as slicing.
Chill in freezer for 5 minutes before processing.
Cut into pieces to fit feed tube. Stand pieces in
feed tube and use light pressure on pusher. Use
4 oz. maximum.
Soft cheeses like mozzarella
Do not slice.
Same as slicing. Chill 5 minutes in freezer before
processing. Use 4 oz. maximum.
Medium-hard cheeses like Cheddar and Swiss
Hard cheeses like Parmesan
Cut into pieces to fit feed tube. Stand pieces in
feed tube and use light pressure on pusher.
Do not shred.
Do not slice.
1ꢀ
CALIFORNIA RESIDENTS ONLY
WARRANTY INFORMATION
California law provides that for In-Warranty Service, California residents
have the option of returning a nonconforming product (A) to the store
where it was purchased or (B) to another retail store which sells Cuisinart®
products of the same type. The retail store shall then, according to its
preference, either repair the product, refer the consumer to an independent
repair facility, replace the product, or refund the purchase price less the
amount directly attributable to the consumer’s prior usage of the product.
If the above two options do not result in the appropriate relief to the
consumer, the consumer may then take the product to an independent
repair facility if service or repair can be economically accomplished.
Cuisinart and not the consumer will be responsible for the reasonable
cost of such service, repair, replacement, or refund for nonconforming
products under warranty.
This warranty is available to consumers only. You are a consumer if you
own a Cuisinart® PowerBlend Duet™ Blender/Food Processor which was
purchased at retail for personal, family or household use. Except as
otherwise required under applicable law, this warranty is not available to
retailers or other commercial purchasers or owners.
We warrant that your Cuisinart® PowerBlend Duet™ Blender/Food Processor
will be free of defects in materials and workmanship under normal home
use for 3 years from the date of original purchase.
We suggest you complete and return the enclosed product registration card
promptly to facilitate verification of the date of original purchase. However,
return of the product registration card does not eliminate the need for the
consumer to maintain the original proof of purchase in order to obtain the
warranty benefits. In the event that you do not have proof of purchase date,
the purchase date for purposes of this warranty will be the date of
manufacture.
If your Cuisinart® PowerBlend Duet™ Blender/Food Processor should prove
to be defective within the warranty period, we will repair or, if we think
necessary, replace it. To obtain warranty service, please call our Customer
Service Center toll-free at 1-800-7ꢀ6-0190 or write to:
California residents may also, according to their preference, return
nonconforming products directly to Cuisinart for repair or, if necessary,
replacement by calling our Consumer Service Center toll-free at
800-7ꢀ6-0190. Cuisinart will be responsible for the cost of the repair,
replacement, and shipping and handling for such nonconforming
products under warranty.
BEFORE RETURNING YOUR CUISINART® PRODUCT
Cuisinart
Important: If the nonconforming product is to be serviced by someone
other than Cuisinart’s Authorized Service Center, please remind the servicer
to call our Consumer Service Center to ensure that the problem is properly
diagnosed, the product serviced with the correct parts, and to ensure that
the product is still under warranty.
150 Milford Road
East Windsor, NJ 085ꢀ0
To facilitate the speed and accuracy of your return, enclose $10.00 for
shipping and handling. (California residents need only supply a proof of
purchase and should call 1-800-7ꢀ6-0190 for shipping instructions.) Please
be sure to include your return address, description of the product's defect,
product serial number, and any other information pertinent to the return.
Please pay by check or money order.
NOTE: For added protection and secure handling of any Cuisinart® product
that is being returned, we recommend you use a traceable, insured delivery
service. Cuisinart cannot be held responsible for in-transit damage or for
packages that are not delivered to us. Lost and/or damaged products are
not covered under warranty.
Your Cuisinart® PowerBlend Duet™ Blender/Food Processor has been
manufactured to the strictest specifications and has been designed for
use only with authorized accessories and replacement parts. This warranty
expressly excludes any defects or damages caused by accessories,
replacement parts or repair service other than those authorized by
Cuisinart.
This warranty does not cover any damage caused by accident, misuse,
shipment or other than ordinary household use.
This warranty excludes all incidental or consequential damages. Some
states do not allow the exclusion or limitation of these damages, so they
may not apply to you.
13
Any trademarks or service marks of third
parties used herein are the trademarks or
service marks of their respective owners.
©ꢀ006 Cuisinart
Cuisinart® is a registered
trademark of Cuisinart
150 Milford Road
East Windsor, NJ 085ꢀ0
Printed in China
06CUꢀ63ꢀ6
14
Version no.: BFP10 IB-7176
Size: 216mm(W) x 178mm (H)
Total Pages: 32 pages
Material: Cover : 157gsm MattArtpaper
Inside : 120gsm GlossArtpaper
Coating: Varnishing in cover
Color: Cover:4C + 1C (Black)
Inside:1C + 1C (Black)
Date: 09-15-2006
P. O. No. 0609000 (09-00-2006_OP)
Coordinator: Astor You
Printer: Chung Tai
|