Catalog #
Type
COMBOLIGHT® COMBO CLASSIC RECESSED
LAMP GROUP 2 - CONFIGURATION “E”
Project
TWO (2) Metal Halide lamp cells - TWO (2) Fluorescent lamp cells
New Construction Recessed Housing - Trim or Trimless
DESCRIPTION:
An adjustable recessed fixture
suitable for multiple downlighting
applications with one point of elec-
trical entry. Mixes the use of metal
halide lamps with fluorescent
lamps. Powder coat finish on hous-
ing & lamp assembly.
B
Aromat®
Electronic
Metal Halide
Ballasts
Dual Fluorescent lamp cells
w/ integral ballast accessible from below
9.50"
Ballast
Integral reflector
Ballast
Integral reflector
CONSTRUCTION:
Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva-
nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.
Thermal Protector
6.90"
6.90"
C
C
A
380º x 45º locking
angular adjustment
45º visual cut-off
Must specify a diffuser or louver
for fluorescent cell. See below.
LAMP ASSEMBLY:
Ceiling compund
is applied right
to the edge of the
fixture opening
Butterfly
Brackets
Two Metal Halide lamp cells with
two fluorescent lamp cells . Can
accept up to two optical acces-
sories. 380º x 45º locking lamp
adjustment. Provides 45º visual
cut-off.
for Black Iron
Mounting
0.75" Trim
7.00"
8.75"
SYSTEM PROTECTION:
Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous-
ing provide cooler operation
ELECTRICAL:
Custom configurations are available with Combo Classic fixtures.
Also available with T8 fluorescent lamps. Consult RSA for details
Fixture is two circuit.
Circuit 1: Integral Aromat® elec-
tronic metal halide ballasts for
metal halide lamps.
Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32 PLT42 T528 T535 T5HO39 T5HO54
A
B
C
65.18” 65.18” 65.18” 30.18” 31.18” 33.18” 112.18” 136.18” 88.18” 112.18”
81.98” 81.98” 81.98” 46.98” 47.98” 49.98” 128.98” 152.98” 104.48” 128.98
Circuit 2: Integral electronic bal-
lasts for fluorescent lamps.
Lutron® dimming ballasts avail-
able upon request.
Lamp Group 2
Metal Halide
25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00”
49.00”
Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).
CR220M39
E
BX40
BK
WH
120
ORDERING EXAMPLE:
= Two PAR20 Metal Halide 39W lamps with Two BIAX® 40W Fluorescent • Black Interior • White Trim • 120 volts
Fluorescent Diffusers and Louvers - Please specify
❑ TWD - Textured White Diffuser ❑ CB1 - 2” Parabolic Louver
Optional Accessories - See RSA Combo Classic accessory page for details.
Made in the USA.
❑ MPD - Conical Prism Diffuser
❑ CB2 - 1” Parabolic Louver
Baffle
Snoots
Louvers
Lenses
Item # / Lamp Type
Configuration
Fluorescent Lamp Cell
BX40 - 40W BIAX®
BX50 - 50W BIAX®
PLL80 - 80W PL-L
PLT26 - 26W PL-T
PLT32 - 32W PL-T
PLT42 - 42W PL-T
T528 - 28W T5
Interior Finish
BK - Black
WH - White
S - Silver
Trim Finish
Voltage
120 - 120 Volts
277 - 277 Volts
Lamp
CR220M39 - PAR20MH 39W
CR230M39 - PAR30MH 39W
CR230M70 - PAR30MH 70W
BK - Black
WH - White
S - Silver
PT - Custom
TR - Trimless
E - Two Metal Halide lamp
cells with Two
Group 2
Metal
Halide
Fluorescent lamp cells
PT - Custom
T535 - 35W T5
T5HO39 - 39W T5HO
T5HO54 - 54W T5HO
T8 lamps also available
SPECIFY -
E
___
___
___
___
___
RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.
•
•
•
RSA LIGHTING
®
|